Video scenes shots:
Watch the video:
Other videos by this author:
 |
CNC Machining Posted by: JMI80
Video duration: 572 seconds Face/ End mill operations with a CNC converted Opti BF20 mill. This machine has ballscrews driven by stepper motors and a vector-drive VFD for the spindle. -JMI80 Related: 20, bf, cnc, homecnc, machining, opti, vario |
 |
SailCam: 1- rig jib Posted by: JMI80
Video duration: 334 seconds IOM RC Yacht 1 rig jib in gusty 4-6 m/s wind. Purpose of the video is to study and analyze jib "flying shape" when sailing upwind. Related: iom, rc |
|
|
Machining of IOM yachts tiller arm's Posted by: JMI80
Video duration: 623 seconds Machining of aluminium tiller arm's for IOM RC yachts. For this video, all tools except 8 mm rougher are driven without coolant to give video viewers better visibility to machining process. Related: cnc, emc2, hobbycnc, homecnc, jmi80, mill |
 |
SailCam: 1- rig mainsail Posted by: JMI80
Video duration: 349 seconds IOM RC yacht 1- rig mainsail in gusty 4-6 m/s wind. Boat is owerpowered and mainsail is flattened and twisted. Purpose of the video is to study mainsail "flying shape" when sailing upwind. Sail shape and apparent wind angles can be analyzed from still pictures captured from the video. Tell tales show separation vortex behind the mast. Related: iom, jmi80, rc |
 |
CNC Machining 4 Posted by: JMI80
Video duration: 476 seconds Finishing operations with a CNC converted Opti BF20 mill. This machine has ballscrews driven by stepper motors and a vector-drive VFD for the spindle Related: cnc, hobbycnc |
 |
Making a fixture for drilling operation Posted by: JMI80
Video duration: 631 seconds One off fixture for angle drilling operation. Roughing end mill takes 3.5 mm deep and 4 mm wide cuts, max. feedrate is 2000 mm/ min. There's more information about this project at my friend websiten at http://www.anderswal lin.net/2008/05/find erscope-rings/ Related: cnc, emc2, hobbycnc, homecnc, jmi80 |
 |
M6 rigid tapping Posted by: JMI80
Video duration: 115 seconds First M6 rigid tapping test in aluminium. Rigid tapping at 500 RPM. Related: cnc, emc2, hobbycnc, homecnc, jmi80 |
 |
CNC Machining2 Posted by: JMI80
Video duration: 230 seconds Finishing operations with a CNC converted Opti BF20 mill. This machine has ballscrews driven by stepper motors and a vector-drive VFD for the spindle Related: 20, bf, cnc, diy, homecnc, opti, vario |
 |
IOM yacht SailCam Posted by: JMI80
Video duration: 67 seconds IOM RC yacht sail shape study in 7-9 m/s wind. Camera is GoPro's waterproof Digital Hero 3 cam. Related: iom, rc |
 |
IOM yacht keel bulb machining 4 Posted by: JMI80
Video duration: 404 seconds DIY minimill machining structural steel keel bulb for IOM RC yacht. There's more information and pictures about this machine at my CNC Zone thread: http://www.cnczon e.com/forums/ showthread.php?s= 072d31e13c0a035b62cc 0f2a6a44cc7c&t=40018 and at my friend web site: www.anderswallin. net Related: cnc, hobby, home, machining |
 |
IOM yacht keel bulb machining 3 Posted by: JMI80
Video duration: 340 seconds DIY minimill machining structural steel keel bulb for IOM RC yacht. This machine has now DC servo electronics in use. There's more information and pictures about this machine at my CNC Zone thread: http://www.cnczon e.com/forums/showthr ead.php?s=072d31e13c 0a035b62cc0f2a6a44 cc7c&t=40018 and at my friend web site: www.anderswallin. net Related: cnc, cncmachining, hobbycnc, homecnc, jmi80, machining |
 |
M3 rigid tapping Posted by: JMI80
Video duration: 154 seconds First M3 rigid tapping test in aluminium. Related: cnc, emc2, hobbycnc, homecnc, jmi80 |
 |
CNC Machining 3 Posted by: JMI80
Video duration: 99 seconds Drilling operations with a CNC converted Opti BF20 mill. This machine has ballscrews driven by stepper motors and a vector-drive VFD for the spindle Related: cnc, homecnc |
 |
IOM yacht keel bulb machining1 Posted by: JMI80
Video duration: 334 seconds DIY minimill machining structural steel keel bulb for IOM RC yacht. This machine has now DC servo electronics in use. There's more information and pictures about this machine at my CNC Zone thread: http://www.cnczon e.com/forums/ showthread.php?s= 072d31e13c0a035b62cc 0f2a6a44cc7c&t=40018 and at my friend web site: www.anderswallin. net Related: cnc, emc2, hobbycnc, homecnc, jmi80, machining |
